BASIC INFO
Specification
- Primary heating up takes very short time, only about 40 seconds, shorter than general faze machines.
- The innovative heating preservation function of the heater, under status of standby, heater keeps heating up steadily by lower temperature to protect the heating pipe to prolong the life.
- Drying, stable and smoothly smoke output control from 1-100%. High quality smoke, with smooth fan effect, so that the effect of smoke thinner and more uniform.
- The hanging bracket of the machine can be used as a tripod and do a variety of angles setting.
- Excellent design of 3-liter liquid tank has no worry of oil leaking when being operated up spray or forward spray. Quick connector makes replacement direct and easier when performance is ongoing.
- DMX on board, 3 DMX modes for choice; 1CH, 2CH, 4CH, operate by any additional DMX controller.
- Built-in multi-function operation control. Built-In timer control and continuous fogging control.
- Equipped with 0-90 degree adjustable air deflector.
- Heavy-duty. Able to keep working long time.
- Self-cleaning function: The machine design of machine stops working after a delay of 100 seconds, automatically clear the tubing of the remaining liquid.
- Easy understanding LED screen and intelligent design of software control.
- Could be used with the VT-1 controller (optional). Simple and user-friendly design makes FZ-1.0X easier to use.
- The streamline housing could be hanging, side hanging, landing installation, easy to set in various occasions.
| Name | Whirly Pro Faze |
| Item No. | FZ-1.0X |
| Heater Power | 450W |
| Consumption | 465W |
| DMX512 CH. | 1CH, 2CH, or 4CH |
| Built-in Function | Timing Fogging Continuous Fogging |
| Fuse (120V) | 250V 6.3A |
| Fuse (230V,240V) | 250V 4A |
| Display | LED Screen |
| Tank (liters) | 3L |
| Fog Output (cu.ft/min) | 4000 |
| Warm Up time(seconds) | 40s |
| Fluid Consumption (ml/min) | 4.5ml/min |
| Date Connection | 3P XLR |
| Low Fluid Shutdown | Yes |
| Bracket | Yes |
| Voltage | 120V/60Hz, 230V,240V/50Hz |
| Dimensions/mm (LxWxH with bracket) | 414x202x303mm |
| Weight (kg) | 4.5kg |
| Controller (Optional) | VT-1 |
Prev： FZ-0.8 | Whirly Faze
